A hydrogen MASER emits light in the infra red and red aspect of the hydrogen spectrum. The original MASER functioned in the microwave aspect of the electromagnetic spectrum.
Magnetic motors, intended to produce free of charge power with no any external energy or a fuel supply, are still met with disbelief about how they function and why they do. Historians acknowledge Howard Johnson as the creator of the 1st functioning magnetic energy generator. He collected U.S. patent No. 4,151,431 for his invention.
Heat from the ground is absorbed at low temperatures into a fluid inside a loop of pipe (a ground loop) buried underground. The fluid then passes by way of a compressor that raises it to a greater temperature, which can then heat water for the heating and hot water circuits (showers) of the home. The cooled ground-loop fluid passes back into the ground where it absorbs additional power from the ground in a continuous process as long as heating is necessary.
If high pressurized water is not obtainable, then water can be injected deep below ground exactly where it permeates via fissures and absorbs heat from the surrounding rock. The fluid that comes back to the surface is quite hot and has higher stress and this heat is extracted to generate electrical energy (Figs four and 5). The cooled water is then re-injected below ground to total the cycle.
Some could consider this to be hard, even so, even the most complicated circuit diagram or Tesla experiment schematics used for enhancing the power of the generator are not that challenging to fully grasp. With only a couple of hours of investigation and the willingness to get your hands dirty soldering a handful of components to a circuit board, your new Tesla generator can be ready in no time at all.